DIY Minnie Mouse Ears

Materials:

• Black Felt
• Two circular Styrofoam (In whatever size of your choice)
• Black pipe cleaner sticks 
• Glue gun with glue sticks
• Scissors
• Plastic Headband
• A bow (buy one already made or make your own out of desired ribbon)
• Rhinestone 2mm (any size will do, your choice)
• Sequins

(ex. 3)

Getting started

1. Cut two circles from the black felt that are the same size has the circular Styrofoam. Do this for both ears. 
2. Heat up your glue gun and glue the black felt to both sides of the Styrofoam. Make sure to glue around thoroughly so that the foam is fully covered. Trim any excess black felt sticking up.
3. Next, take two pipe cleaner sticks and wrap them around the ears, twist together to secure them. Put a little drop of hot glue on the pipe cleaner sticks to secure them in place (in SOME spots only not all the way around.)



(ex. 4)

4. Now take the plastic headband and slide both ears one at a time on the headband through a small opening between pipe cleaner stick and felt ears. Slide the ears to your desired spot and hold them in place then use hot glue to secure them on the headband.
5. Take your bow and glue it between the ears, add a little glue at the corners of the bow and glue to the ears for extra support. You can also tie some ribbon onto the headband between both ears. 
6. You can decorate your bow with rhinestones or sequins if you like, your choice. *Best to do this before gluing onto headband. (Optional)

Now you are done! Yeah!

Finished look....